Commercial applications

Coatings, Inks, and Composites

Rugged protective coatings, conductive inks, and reinforced composites designed for durability, consistency, and practical processing.

Updated MagMR RF stabilization coating containers shown with a drone and coated electronics enclosure
MRD commercial formulation and application-development platform

Functionalized MOLECULAR REBAR® binds into epoxy and urethane coatings and composites, improves damage tolerance, electrically connects corrosion inhibitors, and can reduce zinc demand in zinc-rich primers.

In conductive inks, tailored MR reinforces the conductive network so printed features retain performance through flexing and stretching while supporting thinner, higher-resolution traces.

Application-ready performance

Make thin functional layers work harder—and last longer.

Molecular Rebar Design logo

MRD commercial formulation and application-development platform

MRD helps coating and ink formulators strengthen the interfaces that usually fail first. Discrete, functionalized nanotubes bridge particles, reinforce the cured matrix, support electrical pathways, and enter established coating and printing workflows in practical liquid formats.

Discuss this application ↗
Up to 3×Longer protective-coating lifetime reported
+70%Impact-strength improvement reported
≤80% ZnPathway from conventional 90% zinc-rich primers
Water + solventEvaluation formats for conductive inks

Protective coatings

Increase impact tolerance and corrosion-protection durability in epoxy, urethane, and zinc-rich systems while creating pathways to lower inhibitor loading.

Conductive inks

Maintain electrical continuity through flexing, stretching, and creasing while supporting thinner traces, improved resolution, and reduced flaking.

Formulation support

Match surface chemistry, carrier, concentration, and viscosity to the customer’s resin, solvent, printing method, substrate, and qualification target.

Coatings, Inks, and Composites Performance

Performance evidence from formulation to attenuation.

MOLECULAR REBAR® matrix reinforcement

MOLECULAR REBAR® matrix reinforcement

Discrete nanotubes can fully disperse into the host matrix and penetrate carbon- or glass-fiber layers, improving mechanical and electrical properties. MR can enhance toughness and durability in epoxies and improve interlaminar performance between fibers while fitting existing composite manufacturing. The masterbatch is designed for practical dilution with limited changes to flow viscosity or curing conditions.

MagMR coating architecture

MagMR coating architecture

MagMR is a lightweight, spray-applied nanocomposite coating designed to reduce electromagnetic signatures while protecting sensitive electronics and sensors. Rather than primarily reflecting electromagnetic energy, it absorbs a significant portion and dissipates it as low-level heat through the nanotube network.

MagMR coating properties

MagMR coating properties

The published property table accompanies a water-based, low-VOC coating with excellent adhesion to metals, plastics, and composites. It is available in aerosol or conventional coating formats for production, depot maintenance, and field repair.

Mechanism of EMI attenuation

Mechanism of EMI attenuation

Discrete MOLECULAR REBAR® carbon nanotubes, magnetic nanoparticles, and a tailored acrylic binder combine dielectric, magnetic, interfacial-polarization, and thermal-loss pathways to absorb incoming EMI and convert it to low-level heat.

Magnetic nanoparticle micrograph

Magnetic nanoparticle micrograph

Electron micrograph of MOLECULAR REBAR® with attached magnetic nanoparticles for enhanced EMI absorptivity. Tailoring the nanotube surface with other nanoparticles provides another route to advanced shielding performance.

EMI shielding performance

EMI shielding performance

Shielding behavior from megahertz to terahertz can be designed for reflectance or absorbance by tailoring MR surface chemistry and concentration. MR can be used in coatings, tapes, sheets, foam adhesives, greases, and with other EMI materials.

MagMR coating features

Performance data

Technical signals for evaluation.

These figures frame the application opportunity. Final performance depends on the host material, formulation, process, geometry, and test method.

Up to 3×Longer coating lifetime reported
70%Higher impact strength reported
≤80% ZnPathway from conventional 90% zinc-rich primers

Why it matters

Performance advantages

  • Longer corrosion-protection lifetime
  • Higher impact and damage tolerance
  • Thinner functional coatings and reduced inhibitor loading
  • Improved conductivity at lower printed thickness
  • More consistent print performance and fewer rejects
  • Improved conductivity during stretching and better resolution

What is supplied

Products & formats

  • 2% MR in bisphenol A/epichlorohydrin liquid epoxy resin
  • Water-based conductive products with 3 wt% MR
  • Solvent-based products with 2 wt% MR in ethylene glycol butyl ether
  • Evaluation quantities from small containers through kilogram and larger supply

How it enters production

Practical integration

  • Compatible with epoxy, urethane, and composite systems
  • Supports nano- to microparticle conductive inks
  • Applicable to digital and screen-printing processes
  • Discrete nanotubes help avoid coating defects associated with large agglomerates

Questions

Evaluating carbon nanotubes for coatings, inks, and composites.

What does MRD supply for coatings, inks, and composites applications?

  • 2% MR in bisphenol A/epichlorohydrin liquid epoxy resin
  • Water-based conductive products with 3 wt% MR
  • Solvent-based products with 2 wt% MR in ethylene glycol butyl ether
  • Evaluation quantities from small containers through kilogram and larger supply

How is MOLECULAR REBAR® integrated into coatings, inks, and composites manufacturing?

  • Compatible with epoxy, urethane, and composite systems
  • Supports nano- to microparticle conductive inks
  • Applicable to digital and screen-printing processes
  • Discrete nanotubes help avoid coating defects associated with large agglomerates

What performance targets can be evaluated in coatings, inks, and composites?

  • Longer corrosion-protection lifetime
  • Higher impact and damage tolerance
  • Thinner functional coatings and reduced inhibitor loading
  • Improved conductivity at lower printed thickness
  • More consistent print performance and fewer rejects
  • Improved conductivity during stretching and better resolution

Discuss this application

Bring us the performance target.

MRD can help select a material format, design an evaluation, and create a path from formulation to commercial supply.

Talk to Us ↗