Coatings, Inks, and Composites Technical Library
Coatings, Inks, and Composites
engineered to perform.
Technical bulletins, case studies, brochures, and application data for coatings, composite reinforcement, conductive inks, thermal materials, and spray-applied MagMR coatings.

16 resources
Application knowledge,
kept in one place.
Select a resource to open its complete document. Each item is assigned to this library for its direct relevance to coatings, inks, and composites.
Improving Conductivity, Durability and Manufacturing Throughput Using MOLECULAR REBAR® in Silver Conductive Inks
Application guidance for using discrete, surface-engineered nanotubes to bridge silver particles, improve sintering consistency, retain conductivity, and support finer flexible printed features.
Novel Technology Enables Industrial Coatings to Perform at New and Longer-Lasting Levels
A five-page technical article describing discrete MOLECULAR REBAR® reinforcement in industrial epoxy coatings, including fracture toughness, impact resistance, adhesion, and corrosion performance.
MOLECULAR REBAR® for Coatings
A coatings-focused presentation covering material formats, formulation routes, corrosion resistance, adhesion, impact strength, zinc-rich primers, and lifetime cost reduction.
MOLECULAR REBAR® for Conductive Inks
An updated brochure on storage stability, printing quality, adhesion, fusion, flexibility, conductivity, and crack resistance in digital, flexographic, and screen-printing inks.
MOLECULAR REBAR® with Organic Corrosion Inhibitors in Epoxy Primers
A case study of 0.3 wt% MR in a solvent-borne epoxy/polyamide primer containing an organic corrosion inhibitor, with electrochemical, salt-fog, and cathodic-disbondment comparisons.
Understanding MOLECULAR REBAR® Electrochemistry in Anticorrosion Epoxy Coatings
A detailed review of epoxy coating resistance, inhibitor-system behavior, cathodic disbondment, zinc electrochemistry, and surface-group response under accelerated test conditions.
Introducing MOLECULAR REBAR® for Coatings and Composites
An updated introduction to discrete, surface-engineered carbon nanotubes for polymer reinforcement, stable distribution, crack control, and practical coatings and composite integration.
Cyclic Fatigue Resistance of Bisphenol F Epoxy with MOLECULAR REBAR®
A case study examining fracture initiation, cyclic crack growth, fracture toughness, and run-out behavior in Bisphenol F epoxy containing low loadings of discrete MR.
Development of MOLECULAR REBAR® Silver Inks
A printed-electronics white paper on silver-particle interconnection, rheology, sintering, conductivity, flex fatigue, manufacturing speed, and lower-temperature processing.
Introduction to MOLECULAR REBAR® in Anticorrosion Coatings
An introduction to small-loading MR additions in industrial anticorrosion coatings, including salt-fog durability, adhesion, impact resistance, water uptake, and zinc-rich systems.
MOLECULAR REBAR® in Tetrafunctional Epoxy Composites
An updated case study covering dispersion, cure behavior, carbon-fiber impregnation, thermal response, and preliminary mechanical performance in a high-temperature epoxy system.
MOLECULAR REBAR® with an Inorganic Anticorrosion Inhibitor
A two-component epoxy-primer case study comparing formulations with and without 0.3 wt% MR alongside a strontium zinc phosphosilicate inhibitor.
MOLECULAR REBAR®: Improving Epoxy Fracture and Fatigue Resistance
Updated fracture-mechanism mapping and evidence for higher critical stress intensity, reduced notch sensitivity, and improved fatigue resistance at low MR loading.
MOLECULAR REBAR® for Coatings
A concise introduction to MOLECULAR REBAR® for industrial, protective, and marine coating formulations, with application areas, integration pathways, and performance evidence.
Epoxy Encapsulated MOLECULAR REBAR® Safety Data Sheet
Product identification, handling, storage, exposure controls, first-aid, fire response, transport, disposal, and regulatory information for epoxy-encapsulated MR.
Stable MOLECULAR REBAR® Dispersions for Epoxy Thermosets
Updated guidance for preserving discrete nanotube distribution through mixing, curing-agent addition, and thermal cure in application-specific epoxy systems.
Need a specific data set?
Bring us the performance target.
MRD can help identify the most relevant material format, test method, and qualification path for your application.
Talk to Us ↗