Commercial application

Rubber & elastomers

Longer-lasting rubber goods, tougher tires, and reliable performance in severe pressure and temperature environments.

Tire compoundsSpecialty elastomersEngineered rubber goods
WearLonger service life
Crack resistanceStronger fatigue performance
HPHTDemanding service conditions
Black MOLECULAR REBAR rubber masterbatch pellets
Technology developer, formulation partner, and commercial materials supplier

MOLECULAR REBAR® improves wear resistance and crack-propagation resistance, helping extend the service life of rubber goods and tires while allowing formulators to adjust other critical properties without sacrificing longevity.

Commercial elastomer formulations also use MR for electrical conductivity, thermal conductivity, rapid-gas-decompression resistance, high-temperature extrusion resistance, and demanding high-pressure/high-temperature service.

What it is

Discrete nanotubes that stop cracks before they grow.

Ordinary carbon nanotubes clump and underperform. MOLECULAR REBAR® is individualized, functionalized, and delivered in a form designed to distribute through the host elastomer.

Its high aspect ratio creates a reinforcing network that helps bridge microcracks, resist tearing and abrasion, and strengthen demanding rubber systems without replacing the formulation properties that already work.

TEM showing crack propagation in unreinforced white spacesTEM showing Molecular Rebar in the white spaces

Rubber performance evidence

How MOLECULAR REBAR® improves rubber performance.

CNT-Graphic

Rubber and Elastomers

Molecular Rebar®, MR, increases wear resistance to extend the lifetime of rubber goods and tires or enable formulators to adjust other critical properties without sacrificing longevity. MR’s optimal aspect ratio and excellent dispersion improve crack propagation resistance, often increasing lifetime 30%+ in macro-abrasive conditions.

MR is also used commercially by customers in elastomer formulations for electrical conductivity, thermal conductivity, and to improve critical properties under high pressure and high temperature conditions, such as Rapid Gas Decompression (RGD) resistance & improved high-temperature extrusion resistance.

  • Improved performance properties
    • Lighter-weight, more fuel efficient, and tougher rubber compounds for tires
    • Greater resistance to abrasion with MR enables further formulation changes
      • Ex: change ratio of polymer types to modify hysteretic properties without sacrificing longevity
  • Improved performance characteristics for tough applications
    • Expanded operational conditions for new components – higher pressures, temperatures, and rough environments
    • Generates expansion of existing business for customers or enables new applications / market share

By leveraging the improved resistance to wear, rubber components can be optimized through engineering design changes. Allow Molecular Rebar® to be a new ingredient in your recipe cabinet.

Rubber performance platform

Build longer service life into demanding rubber compounds.

Molecular Rebar Design logo

Technology developer, formulation partner, and commercial materials supplier

MRD supplies MOLECULAR REBAR® in oil dispersions and polymer masterbatches designed to enter established rubber-compounding workflows. The platform helps compounders improve wear, crack resistance, durability, and functional performance while retaining control of the broader formulation.

Discuss this application ↗
Up to 2×Lifetime often achieved in macro-abrasive conditions
Oil dispersionsProcess-ready format for established compounding
MasterbatchesCarrier polymers matched to the compound
Tires + industrialTread, seals, hoses, belts, and engineered goods

Durability where cracks begin

Discrete nanotubes reinforce the polymer network at the scale where cuts, chips, abrasion, and fatigue damage develop.

Formulation latitude

Improve toughness while preserving room to balance hysteresis, rolling resistance, heat build-up, modulus, temperature, and conductivity.

Practical incorporation

Choose an oil dispersion or polymer masterbatch aligned with the customer’s elastomer, oil package, mixing sequence, and qualification plan.

The products

Four forms, one nanotube.

Oil-carried for dispersion or polymer-carried as a masterbatch—matched to the host polymer and the existing compounding process.

MRO Gen I oil-carried product form
Oil carried · Powder form

Gen I MRO

Oil-dispersed MR for specialty elastomers including NBR, HNBR, XNBR, CR and related systems.

MRO Gen II pellet product form
Oil carried · Pellet form

Gen II MRO

Oil-dispersed MR for NR, SBR, PBR and blends, using common process oils.

Silane-coupled polymer masterbatch strip
Polymer carried · Strip form

Gen IV MR

Silane-coupled MR masterbatch for silica-replacement work in tire and rubber compounds.

Non-oxidized MR polymer masterbatch sheet
Polymer carried · Sheet form

NOMR

Non-oxidized MR masterbatch for demanding HNBR, FEPM, FKM and FFKM applications.

Where the products are usedExplore rubber applicationsView applications ↗

Measured performance

Broad gains, at a fraction of the loading.

In an EV tire program, a low MOLECULAR REBAR® loading improved the evaluated compound while replacing most of the carbon black. Results depend on formulation, process, geometry, and test method.

~45%Maximum elongation
~27%High-strain modulus retention
~25%Tear toughness
~10%Tensile strength

Formulation, compound and test details are available for technical review. Results shown were achieved in a specific development program and should not be interpreted as universal guarantees.

What we’re developing

A deep pipeline, not a single product.

Beyond today’s commercial base, MOLECULAR REBAR® is advancing programs that open large new categories.

The program

Silane MR for EV tires

Replacing silica for lighter, longer-lasting EV tires—built and tested by Goodyear in a U.S. DOE program.

Sustainability

6PPD-free tires

Addressing the 6PPD-quinone problem in tire wear—recognized with EPA SBIR support and a Hill Prize.

Energy

Oil & gas extraction

Pairing HPHT downhole seals with deeper, hotter, more corrosive wells—extending a proven commercial oilfield base into more demanding validation.

New materials

Heat-dissipating textiles

MR in TPU, foam and PET fibers—moving heat, shielding EMI/RF and lightening engineered fabrics.

Discuss a development program ↗

Why it matters

Performance advantages

  • Lower component cost per operating hour
  • Less downtime and higher throughput
  • Longer service life than the incremental material cost
  • Lighter, tougher, and potentially more fuel-efficient tire compounds
  • More freedom to tune polymer ratios and hysteretic properties
  • Expanded operating windows for pressure, temperature, and rough environments

What is supplied

Products & formats

  • MRO Gen I for NBR, HNBR, XNBR, CR/Neoprene, and other specialty polymers
  • MRO Gen II for toughness in NR, SBR, PBR, and their blends
  • Gen IV silane-coupled MR for silica-filler replacement and lower-density compounds
  • Non-oxidized MR masterbatches for HNBR, FEPM, FKM, and FFKM

How it enters production

Practical integration

  • MR oil dispersions fit existing compounding processes
  • MRO is oil-agnostic: any type of plasticizing oil can be used as a carrier agent
  • Oil choices include TOTM, DBEEA, castor, DOP, DOA, DBS, naphthenic, TDAE, RAE, paraffinic, and soybean oil
  • Polymer masterbatches can use MRD-supplied or customer-specific polymers
  • Polymer carriers are matched to existing compound specifications

Questions

Evaluating carbon nanotubes for rubber & elastomers.

What does MRD supply for rubber & elastomers applications?

  • MRO Gen I for NBR, HNBR, XNBR, CR/Neoprene, and other specialty polymers
  • MRO Gen II for toughness in NR, SBR, PBR, and their blends
  • Gen IV silane-coupled MR for silica-filler replacement and lower-density compounds
  • Non-oxidized MR masterbatches for HNBR, FEPM, FKM, and FFKM

How is MOLECULAR REBAR® integrated into rubber & elastomers manufacturing?

  • MR oil dispersions fit existing compounding processes
  • MRO is oil-agnostic: any type of plasticizing oil can be used as a carrier agent
  • Oil choices include TOTM, DBEEA, castor, DOP, DOA, DBS, naphthenic, TDAE, RAE, paraffinic, and soybean oil
  • Polymer masterbatches can use MRD-supplied or customer-specific polymers
  • Polymer carriers are matched to existing compound specifications

What performance targets can be evaluated in rubber & elastomers?

  • Lower component cost per operating hour
  • Less downtime and higher throughput
  • Longer service life than the incremental material cost
  • Lighter, tougher, and potentially more fuel-efficient tire compounds
  • More freedom to tune polymer ratios and hysteretic properties
  • Expanded operating windows for pressure, temperature, and rough environments

North American distribution

Available through Thomas Swan.

Thomas Swan is MRD’s exclusive distributor in North America for MRO products used in rubber parts and engineered rubber goods.

Visit Thomas Swan ↗

Discuss this application

Bring us the performance target.

MRD can help select a material format, design an evaluation, and create a path from formulation to commercial supply.

Talk to Us ↗