News : MOLECULAR REBAR®

Home/News : MOLECULAR REBAR®/
15 08, 2018

2018 International Elastomers Conference, Rubber Division, ACS; to give 2 talks

By |Categories: Featured News|

Dr. Sateesh Peddini and Mr. August Krupp will each present at the 2018 International Elastomers Conference, October 9-11, 2018. Dr. Peddini will present in Technical Session A; ‘Advances in Material and Processes of Car and Truck Tires’ on Wednesday October 10 at 2:30 pm. His presentation is entitled “Enhancements in Off-the-Road (OTR) Tire Formulations with Discrete Surface Functionalized Multiwall Carbon Nanotubes: Wear, Abrasion and Tear Resistance. Mr. Krupp will speak in Technical Session B ‘Nano

4 04, 2018

Dr. Clive Bosnyak to speak at the SPE Annual Technical Conference, Orlando, FL on May 8, 2018

By |Categories: Featured News|

Dr. Clive Bosnyak will present at the Society of Plastics Engineers Annual Technical Conference (ANTEC), which is taking place at the NPE in Orlando Florida from May 6-12, 2018. He will present on Tuesday May 8, 2018 in Technical Session 4, Engineering Properties and Structure: Polymer Physical Properties I. The talk will be on “Understanding the Deformation Behavior of Nanocomposites with Discrete Carbon Nanotubes. http://www.npe.org/education-highlights

12 09, 2017

2017 International Elastomers Conference, Rubber Division, ACS; Molecular Rebar Design to present paper

By |Categories: Featured News|

Mr. August Krupp will present a paper at the 2017 International Elastomers Conference, Cleveland, OH, October 10, 2017, Session A, Room 25. His presentation is entitled “Reinforcement of Rubber Compounds Utilizing Functionalized and Discrete Multi-Wall Carbon Nanotubes”. https://www.rubber.org/Data/Sites/22/https://www.rubber.org/Data/Sites/22/Assets/pdfs/showguide-iec2017.pdfAssets/pdfs/showguide-iec2017.pdf  

6 09, 2017

Molecular Rebar Design presents at 2017 Western Coatings Societies Symposium

By |Categories: Featured News|

Dr. Andrew Stewart presented at the 2017 Western Coatings Societies Conference, Tuesday October 17, 2017. His talk was titled; ‘Enhanced Coating Performance using Discrete, Functionalized Multi-Wall Carbon Nanotubes’. The talk was very well attended with many questions that had to be taken outside to keep on time. https://westerncoatings.org/full-schedule/

3 09, 2017

The University of Texas at Austin, McKetta department of Chemical Engineering – 50 years Symposium & Celebration of Dr. Don Paul. October 12-14, 2017. Molecular Rebar Design invited to speak

By |Categories: Featured News|

Dr. Clive Bosnyak and Mr. Kurt Swogger are invited to the 50 years Symposium and Celebration of Dr. Don Paul, a legend in the field of Polymer Engineering and Science as a result of making some of the key discoveries in several areas of Polymer Science and Technology. He has been cited more than 42,000 times. https://che.utexas.edu/don-paul-50-symposium/dr-donald-r-paul/ Dr. Bosnyak will present a talk on October 12, 2017 titled “Unlocking the Full Potential of Carbon Nanotubes”,

5 08, 2017

MOLECULAR REBAR DESIGN to participate in the Texas A&M Energy Institute Research Workshop: Materials in Energy – September 20, 2017

By |Categories: Featured News|

Mr. Kurt Swogger presented a talk to the Texas A&M Energy Institute Research Workshop: Materials in Energy, entitled ‘Changing Energy Storage with Individual Carbon Nanotubes called Molecular Rebar®’. After the talks, Mr. Swogger participated in a Panel discussion with 3 other presenters where they discussed ways that Advanced Material Technology can help society obtain sufficient energy to sustain itself without causing irrevocable damage to the environment. http://energy.tamu.edu/events/texas-energy-institute-research-workshop-materials-energy/

1 05, 2017

2017 United States National Congress for Theoretical and Applied Mechanics – Dr. Clive Bosnyak to speak on Friday morning June 8, 2017 in Technical Session 11.

By |Categories: General News|

Dr. Clive Bosnyak, co-owner and Chief Technology Officer of Molecular Rebar Design will speak at the prestigious United States Congress for Theoretical and Applied Mechanics. This congress is held every 4 years. This year it will be held at Northwestern University in Chicago, Illinois. He will speak at the session on Friday morning June 8, 2017 which is entitled, Fracture and Lifetime of Materials in Honor of Prof Alexander Chudnovsky’s 80th Birthday. Dr. Bosnyak’s talk

15 04, 2016

MRD Wins Award for Technical Excellence at the 2016 Waterborne Symposium

By |Categories: General News|

http://http://www.pcimag.com/articles/101702-awards-announced-for-waterborne-symposium-presenters PCI Magazine’s Award for Technical Excellence was given to Andrew Stewart, of Molecular REBAR Design LLC, and co-authors Douglas Hunter, Steve Hoenig and Wendy Hoenig. The paper was titled “Novel Industrial Coatings Developed Using Molecular Rebar®.”

29 01, 2016

BioPact Receives 2016 Innovation Technology Award for its MGMR Nano-Drug Delivery Technology

By |Categories: General News|

CAMBRIDGE, Mass., Jan. 28, 2016 /PRNewswire/ -- BioPact is the 2016 recipient of the Drug Delivery Partnerships Technology Innovation Award.  The award celebrates game-changing technological innovation in drug delivery over the past year.  For 20 years, Drug Delivery Partnerships (DDP) has been the world's largest drug delivery meeting to accelerate drugs to market and lengthen lifecycles by finding new partners, new drug delivery technologies, and new formulation development strategies. BioPact's Chief Executive Officer, Joe Dillon, Ph.D.,

9 12, 2015

Joint Venture, Black Diamond Structures, reveals latest lithium-ion research at The Battery Show

By |Categories: Featured News|

Dr. Clive Bosnyak, Chief Scientific Officer for Black Diamond Structures, presented some exciting new research revealing significant lithium-ion performance enhancements utilizing the company's proprietary nanomaterial technology, MOLECULAR REBAR®.  Bosnyak, who addressed attendees at The Battery Show 2015 in Novi, Michigan, commented that he and his team are advancing the science for nanomaterials, demonstrating improvements in the performance properties of both organic and inorganic binders and active materials, including polymer gel and solid electrolytes. MOLECULAR REBAR® are clean, discrete, open-ended nanotubes which can